模具產品有哪些問題英語怎麼說

1. 注塑模，一個模具開好幾個不同的產品，這種模具專業英語怎麼說

More than a mould cavity

2. 模具類英文，請高手幫忙翻譯，非常感謝！

在我們努力確保我們收到鞋是從防霉免費當它到達我們的配送中心，我們修訂回和加強預防措施的模具現在強制所答有自助團體和/或特困鞋類供應商採用。如果一般工廠沒有進行清洗，或地方質量保證檢查不符合的潔凈標准感到滿意，細節將顯示在模具預防清單，工廠將被視為拒絕，不適合我們的生產，直至，倍的一般清潔工作已經完成正確

3. 關於模具方面的英語翻譯 幫忙！急！

1. Nb cav
鈮型腔（說明：這是估計的，cav估計是cavity的簡寫，那就是型腔或空腔、諧振腔)
2. View
視圖（如前視專圖、側視屬圖，頂視圖）
3. Tool thickness
工具厚度
4. Tool weight
工具重量
5. Runner And Type Gate
流道和類型澆口(這里Type Gate有點疑問，是否是澆口類型之誤）
6. Ejection
排出
7. Mould Cost in RMB with VAT
帶增值稅的模具成本

4. 請教模具英語問題

Mould
n. 模子(樣板,形狀,類型)
vt 模壓(鑄造,輪廓相符合)

MOLD
n. 模子,雛型
v. 形成,塑造

MOLDING 成型[常+s][建築](裝飾牆壁等凸出部用)嵌線

5. 英語翻譯（模具方面的）高手來

1.以模具半為中心:開單向閘,物料必須滿,而且能看見。
2.以每腔凹槽為中心:每個人都必須由錐體排列插針、單向閘或錐閥座密封,防止匹配和損害的核心/噴管提示安裝時。
3。模具的原則是獲得最高的鎖模力和最小的閃光,加上一個直接的閥控、組件轉90度的模具表面直接針形閥控。這個模具由液壓啟動剝料板（卸料板）。它必須是一個穩定的高品質的模具。

翻譯到這樣夠了吧~多少分你看著給吧~

6. 英語翻譯,模具問題

No wrinkles should appear on soles made from casts that have been electric plated and textured (after such processes)

7. 模具和注塑方面的一些英語翻譯，求助

開模行程，open ould stroke
定產，order proction
定產效率，efficiency of order proction
注膠切換點，glue-injection switching point
保壓壓力1，protective pressure
倒索，inverse sling
模保護，mould protection
關模版低壓，close mould low pressure
炮筒溫度權，gun barrel temperature
回料量，returning amount
注射壓力，injecting pressure
色母配比，raw color ratio mixing
配套摸具，matched mold
頂針次數，thimble times
立式注膠機 vertical injector
工藝卡， WSP(work specification procere)
工 作 指 導work instruction

8. 請懂模具方面英文高手幫忙翻譯--多謝

9 years work experience in plastic mould taiwan-owned enterprise. Four years of factory management experience, familiar with mould design and project management process, master proction management process, common plastic moulds, steel performance, application and design software skilled Pro/e, Moldflow (mold flow analysis), AutoCAD, using UG.
In 2001-02-2005-3 mould manufacturing (2003); the leader to start
2005-03-2007-05 mould design and project management (classes),
The 2007-05 started mould department supervisor responsibilities.
There had been engaged in before the mould processing and manufacturing mold design and engineering analysis review. And the company grow together, the mould department mainly manufacturing cell phone casing and department of Apple laptop (ipad), LCD TV shell, guide the mould, customers are in Sony Ericsson Apple NOKIA MOTOROLA SAMSUNG, DELL HP MICROSOFT in mold design, manufacture process and posterior segment, molding mould cavity, try to experience, mold cavity assessment is quite before review, another factory factory and system programming ability, familiar with computer operation of systematic factory.
Familiar with IMD, IML (imf), double shot Isertmolding IMR, Hot runner structure, structure and proficient in use of ms office software.

Main responsibilities:
1 responsible for mould department administration work, ecation, training and the overall arrangements for 8s management,
2. Responsible for mould design structure and normative documents audit, processing standards inspection audit,
3 foreign responsible for the communication with customers, design, project for the guest, achieve satisfaction,
4 internal quality management and improvement of the mould and die mold testing and validation check proct,
5 for each month guiding colleagues to work, to improve technical review and statistics report,
6 for technical requirements for regular training employees to work related aspects, communication,
7. Mould key difficulty and guide the dominant in the department employees, requirement planning schele,
8. Responsible for internal performance management system of examination, to continuously improve their projects, fair and reasonable,
9 for the environment, leading to EHS regulations and management committee members of the security council.
Responsibility: responsible for the description of mold proction management, project, and the testing team management, mould and guide the key difficulty leading in the department employee's work and required to make plans with customer's schele, communication, the processing plan of standard time, the work schele arrangement, testing and repair mode shape problem tracking and processing.

9. 翻譯英語，模具方面的

The EVA area pointed by arrow is too large, causing the rubber along its side to curl up