冶金設備英語
『壹』 冶金機械專業英語詞彙
因為我不是冶金機械專業的，所以不是很清楚你需要的究竟是那些詞彙，只是正好存有一部分有色金屬以及機械方面的詞彙表，所以就挑選了一些。（真不是故意弄這么多的，實在是不懂這些……抱歉啊~）如果需要更多的話，就補充問題吧~
鋼鐵的製造
Manufacturing of Steel
連續鑄造法 Continuous casting process
電爐 Electric furnace
均熱爐 Soaking pit
全靜鋼 Killed steel
半靜鋼 Semi-killed steel
沸騰鋼(未凈鋼) Rimmed steel
鋼鐵生產流程 Steel Proction Flow Chart
鋼材的熔鑄、鍛造、擠壓及延軋
The Casting, Fogging, Extrusion, Rolling & Steel
熔鑄 Casting
鍛造 Fogging
擠壓 Extrusion
延軋 Rolling
沖剪 Drawing & stamping
特殊鋼 Special Steel
簡介
General
特殊鋼以原素分類
Classification of Special Steel according to Element
特殊鋼以用途來分類
Classification of Special Steel according to End Usage
易車(快削)不銹鋼
Free Cutting Stainless Steel
含鉛易車鋼
Leaded Free Cutting Steel
含硫易車鋼
Sulphuric Free Cutting Steel
硬化性能
Hardenability
鋼的脆性
Brittleness of Steel
低溫脆性 Cold brittleness
回火脆性 Temper brittleness
日工標准下的特殊鋼材
Specail Steel according to JIS Standard
鉻鋼 – 日工標准 JIS G4104
Chrome steel to JIS G4104
鉻鉬鋼鋼材 – 日工標准 G4105 62
Chrome Molybdenum steel to JIS G4105
鎳鉻 – 日工標准 G 63
Chrome Nickel steel to JIS G
鎳鉻鉬鋼 – 日工標准 G4103 64
Nickel, Chrome & Molybdenum Steel to JIS G4103
高錳鋼鑄 – 日工標准
High manganese steel to JIS standard
片及板材
Chapter Four-Strip, Steel & Plate
冷轆低碳鋼片(雙單光片)(日工標准 JIS G3141) 73 - 95
Cold Rolled (Low carbon) Steel Strip (to JIS G 3141)
簡介
General
美材試標準的冷轆低碳鋼片
Cold Rolled Steel Strip American Standard – American Society for testing and materials (ASTM)
日工標准JIS G3141冷轆低碳鋼片(雙單光片)的編號淺釋
Decoding of cold rolled(Low carbon)steel strip JIS G3141
材料的加工性能 Drawing abillity
硬度 Hardness
表面處理 Surface finish
冷轆鋼捆片及張片製作流程圖表
Proction flow chart cold rolled steel coil sheet
冷轆鋼捆片及張片的電鍍和印刷方法
Cold rolled steel coil & sheet electro-plating & painting method
冷轆(低碳)鋼片的分類用、途、工業標准、品質、加熱狀態及硬度表
End usages, instrial standard, quality, condition and hardness of cold rolled steel strip
硬度及拉力 Hardness & Tensile strength test
拉伸測試(順紋測試)
Elongation test
杯突測試(厚度: 0.4公釐至1.6公釐，准確至0.1公釐 3個試片平均數)
Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm)
曲面(假曲率)
Camber
厚度及闊度公差 Tolerance on Thickness & Width
平坦度(闊度大於500公釐，標准回火)
Flatness (width>500mm, temper: standard)
彎度 Camber
冷轆鋼片儲存與處理提示
General advice on handling & storage of cold rolled steel coil & sheet
防止生銹
Rust Protection
生銹速度表
Speed of rusting
焊接 Welding
氣焊 Gas Welding
埋弧焊 Submerged-arc Welding
電阻焊 Resistance Welding
冷轆鋼片(拉力: 30-32公斤/平方米)在沒有表面處理狀態下的焊接狀況
Spot welding conditions for bared (free from paint, oxides etc) Cold rolled mild steel sheets(T/S:30-32 Kgf/ μ m2)
時間效應(老化)及拉伸應變
Aging & Stretcher Strains
日工標准(JIS G3141)冷轆鋼片化學成份
Chemical composition – cold rolled steel sheet to JIS G3141
冷轆鋼片的"理論重量"計算方程式
Cold Rolled Steel Sheet – Theoretical mass
日工標准(JIS G3141)冷轆鋼片重量列表
Mass of Cold-Rolled Steel Sheet to JIS G3141
冷轆鋼片訂貨需知
Ordering of cold rolled steel strip/sheet
其它日工標准冷軋鋼片(用途及編號)
JIS standard & application of other cold Rolled Special Steel
電鍍鋅鋼片或電解鋼片
Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet
簡介
General
電解/電鍍鋅大大增強鋼片的防銹能力
Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet
上漆能力 Paint Adhesion
電鍍鋅鋼片的焊接
Welding of Electro-galvanized steel sheet
點焊
Spot welding
滾焊
Seam welding
電鍍鋅(電解)鋼片
Electro-galvanized Steel Sheet
生產流程
Proction Flow Chart
常用的鍍鋅鋼片(電解片)的基層金屬、用途、日工標准、美材標准及一般厚度
Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet
鋅鍍層質量 Zinc Coating Mass
表面處理 Surface Treatment
冷軋鋼片 Cold-Rolled Steel Sheet/Strip
熱軋鋼片 Hot-Rolled Sheet/Strip
電解冷軋鋼片厚度公差
Thickness Tolerance of Electrolytic Cold-rolled sheet
熱軋鋼片厚度公差
Thickness Tolerance of Hot-rolled sheet
冷軋或熱軋鋼片闊度公差
Width Tolerance of Cold or Hot-rolled sheet
長度公差 Length Tolerance
理論質量 Theoretical Mass
鋅鍍層質量(兩個相同鋅鍍層厚度)
Mass Calculation of coating (For equal coating)/MM
鋅鍍層質量(兩個不同鋅鍍層厚度)
Mass Calculation of coating (For differential coating)/MM
鍍錫薄鐵片(白鐵皮/馬口鐵) (日工標准 JIS G3303)
簡介
General
鍍錫薄鐵片的構造
Construction of Electrolytic Tinplate
鍍錫薄鋼片(白鐵皮/馬日鐵)製造過程
Proction Process of Electrolytic Tinplate
錫層質量
Mass of Tin Coating (JIS G3303-1987)
兩面均等錫層
Both Side Equally Coated Mass
兩面不均等錫層
Both Side Different Thickness Coated Mass
級別、電鍍方法、鍍層質量及常用稱號
Grade, Plating type, Designation of Coating Mass & Common Coating Mass
鍍層質量標記
Markings & Designations of Differential Coatings
硬度 Hardness
單相軋壓鍍錫薄鐵片(白鐵皮/馬口鐵)
Single-Reced Tinplate
雙相輾壓鍍錫薄鋼片(馬口鐵/白鐵皮)
Dual-Rection Tinplate
鋼的種類 Type of Steel
表面處理 Surface Finish
常用尺寸 Commonly Used Size
電器用硅 [硅] 鋼片 Electrical Steel Sheet
簡介 General
軟磁材料 Soft Magnetic Material
滯後回線 Narrow Hystersis
矯頑磁力 Coercive Force
硬磁材料 Hard Magnetic Material
最大能量積 Maximum Energy Proct
硅含量對電器用的低碳鋼片的最大好處
The Advantage of Using Silicon low Carbon Steel
晶粒取向(Grain-Oriented)及非晶粒取向(Non-Oriented)
Grain Oriented & Non-Oriented
電器用硅 [硅] 鋼片的最終用途及規格
End Usage and Designations of Electrical Steel Strip
電器用的硅 [硅] 鋼片之分類
Classification of Silicon Steel Sheet for Electrical Use
電器用鋼片的絕緣塗層
Performance of Surface Insulation of Electrical Steel Sheets
晶粒取向電器用硅鋼片主要工業標准
International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use
晶粒取向電器用硅鋼片 Grain-Oriented Electrical Steel
晶粒取向，定取向芯鋼片及高硼定取向芯鋼片之磁力性能及夾層系數(日工標准及美材標准)
Magnetic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard)
退火Annealing
電器用鋼片用家需自行應力退火原因
Annealing of the Electrical Steel Sheet
退火時注意事項 Annealing Precautionary
碳污染 Prevent Carbon Contamination
熱力應先從工件邊緣透入
Heat from the Laminated Stacks Edges
提防過份氧化
No Excessive Oxidation
應力退火溫度
Stress –relieving Annealing Temperature
晶粒取向電器用硅 [硅] 鋼片 – 高硼(HI-B)定取向芯鋼片及定取向芯鋼片之機械性能及夾層系數
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets
晶粒取向電器用硅 [硅] 鋼;片 – 高硼低硫(LS)定取向 鋼片之磁力及電力性能
Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS
晶粒取向電器用硅 [硅] 鋼片 – 高硼低硫(LS) 定取向鋼片之機械性能及夾層系數
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS
晶粒取向電器用硅(硅)鋼片-高硼(HI-B)定取向 芯鋼片，定取向芯鋼片及高硼低硫(LS)定取向芯鋼片之厚度及闊度公差
Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain
Oriented Electrical Steel Sheets
晶粒取向電器用硅(硅)鋼片 – 高硼(HI-B)定取向 芯鋼片，定取向芯鋼片及高硼低硫(LS)定取向芯鋼片之標准尺寸及包裝
Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, & SI-ORIENT-CORE-HI-B-LS Grain-
Oriented Electrical Steel Sheets
絕緣表面 Surface Insulation
非晶粒取向電力用鋼片的電力、磁力、機械性能 及夾層系數
Lamination Factors of Electrical, Magnetic & Mechanical Non-Grain Oriented Electrical
電器及家電外殼用鍍層冷轆 [低碳] 鋼片
Coated (Low Carbon) Steel Sheets for Casing,Electricals & Home Appliances
鍍鋁硅鋼片 Aluminized Silicon Alloy Steel Sheet
簡介 General
鍍鋁硅合金鋼片的特色
Feature of Aluminized Silicon Alloy Steel Sheet
用途
End Usages
抗化學品能力
Chemical Resistance
鍍鋁(硅)鋼片 – 日工標准(JIS G3314)
Hot-aluminum-coated sheets and coils to JIS G 3314
鍍鋁(硅)鋼片 – 美材試標准(ASTM A-463-77)35.7 JIS G3314鍍熱浸鋁片的機械性能
Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils
公差 Size Tolerance
鍍鋁(硅)鋼片及其它種類鋼片的抗腐蝕性能比較
Comparsion of various resistance of aluminized steel & other kinds of steel
鍍鋁(硅)鋼片生產流程
Aluminum Steel Sheet, Proction Flow Chart
焊接能力 Weldability
鍍鋁鋼片的焊接狀態(比較冷轆鋼片)
Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip
鋼板
Steel Plate
鋼板用途分類及各國鋼板的工業標准包括日工標准及美材試標准
Type of steel Plate & Related JIS, ASTM and Other Major Instrial Standards
鋼板生產流程
Proction Flow Chart
鋼板訂貨需知
Ordering of Steel Plate
不銹鋼
Stainless Steel
不銹鋼的定義 Definition of Stainless Steel
不銹鋼之分類，耐腐蝕性及耐熱性
Classification, Corrosion Resistant & Heat Resistance of Stainless Steel
鐵鉻系不銹鋼片
Chrome Stainless Steel
馬氏體不銹鋼
Martensite Stainless Steel
低碳馬氏體不銹鋼
Low Carbon Martensite Stainless Steel
含鐵體不銹鋼
Ferrite Stainless Steel
鎳鉻系不銹鋼
Nickel Chrome Stainless Steel
釋出硬化不銹鋼
Precipitation Hardening Stainless Steel
鐵錳鋁不銹鋼
Fe / Mn / Al / Stainless Steel
不銹鋼的磁性
Magnetic Property & Stainless Steel
不銹鋼箔、卷片、片及板之厚度分類
Classification of Foil, Strip, Sheet & Plate by Thickness
表面保護膠紙
Surface protection film
不銹鋼片材常用代號
Designation of SUS Steel Special Use Stainless
表面處理 Surface finish
薄卷片及薄片(0.3至2.9mm厚之片)機械性能
Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet
不銹鋼片機械性能(301, 304, 631, CSP)
Mechanical Properties of Spring use Stainless Steel
不銹鋼 – 種類，工業標准，化學成份，特點及 主要用途
Stainless Steel – Type, Instrial Standard, Chemical Composition, Characteristic & end usage of the most commonly used Stainless Steel
不銹鋼薄片用途例
End Usage of Thinner Gauge
不銹鋼片、板用途例
Examples of End Usages of Strip, Sheet & Plate
不銹鋼應力退火卷片常用規格名詞圖解
General Specification of Tension Annealed Stainless Steel Strips
耐熱不銹鋼
Heat-Resistance Stainless Steel
鎳鉻系耐熱不銹鋼特性、化學成份、及操作溫度
Heat-Resistance Stainless Steel
鉻系耐熱鋼
Chrome Heat Resistance Steel
鎳鉻耐熱鋼
Ni - Cr Heat Resistance Steel
超耐熱鋼
Special Heat Resistance Steel
抗熱超級合金
Heat Resistance Super Alloy
耐熱不銹鋼比重表
Specific Gravity of Heat – resistance steel plates and sheets stainless steel
不銹鋼材及耐熱鋼材標准對照表
Stainless and Heat-Resisting Steels
高碳鋼片 High Carbon Steel Strip
分類
Classification
用組織結構分類
Classification According to Grain Structure
用含碳量分類 – 即低碳鋼、中碳鋼及高碳鋼
Classification According to Carbon Contains
彈簧用碳鋼片
CarbonSteel Strip For Spring Use
冷軋狀態 Cold Rolled Strip
回火狀態 Annealed Strip
淬火及回火狀態
Hardened & Tempered Strip/ Precision – Quenched Steel Strip
貝氏體鋼片 Bainite Steel Strip
彈簧用碳鋼片材之邊緣處理 Edge Finished
淬火劑
Quenching Media
碳鋼回火 Tempering
回火有低溫回火及高溫回火
Low & High Temperature Tempering
高溫回火
High Temperature Tempering
退火 Annealing
完全退火 Full Annealing
擴散退火 Diffusion Annealing
低溫退火 Low Temperature Annealing
中途退火 Process Annealing
球化退火 Spheroidizing Annealing
光輝退火 Bright Annealing
淬火 Quenching
時間淬火 Time Quenching
奧氏鐵孻回火 Austempering
馬氏鐵體淬火 Marquenching
高碳鋼片用途 End Usage of High Carbon Steel Strip
冷軋高碳鋼 – 日本工業標准
Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311
電鍍金屬鋼片 Plate Metal Strip
簡介 General
電鍍金屬捆片的優點
Advantage of Using Plate Metal Strip
金屬捆片電鍍層
Plated Layer of Plated Metal Strip
鍍鎳 Nickel Plated
鍍鉻 Chrome Plated
鍍黃銅 Brass Plated
基層金屬 Base Metal of Plated Metal Strip
低碳鋼或鐵基層金屬
Iron & Low Carbon as Base Metal
不銹鋼基層金屬 Stainless Steel as Base Metal
銅基層金屬
Copper as Base Metal
黃銅基層金屬
Brass as Base Metal
軸承合金 Bearing Alloy
『貳』 「礦山、冶金機械成套設備備件的生產和服務」翻譯成英語
proction and service of the spare parts for the compelete equipment of mining and metallurgical machinery
『叄』 急求關於冶金行業鋼鐵廠一些設備的英文翻譯:
燒結機頭,sintering machine head
燒結機尾,sintering machine end
燒結槽上槽下,upper and lower cintering tank
乾燥,drying
整粒系統,
槽前回篩,before-tank screen
高爐出鐵場,blast furnace casting
配料,ingredients
豎窯燒結,shaft kiln sintering
回轉窯,rotary kiln
帶冷機,belt cooling machine
銅冶答煉制酸, acid making by copper smelting
高溫鋅焙燒.high-temperature zinc roasting
個別拿不準，你再找找！
『肆』 產品介紹的英語
The CPI synthesis chain link oil is one kind of specially made PAO synthesis segregation of hydrocarbons gas lubricating oil, it has the outstanding lubricating ability, the low volatility in the high low temperature situation, may have the good compatibility in the use mineral oil's situation with the mineral oil. This proct is one kind of long life lubricating oil, its anti-wearability and the ep characteristic cause it to apply in the actual load bearing capacity scope are widespread. It is recommended uses in the gear and the bearing. And also has the very broad application in the powder metallurgy aspect.
The CPI high temperature chain link oil is specially the spinning and weaving, the baking varnish and each instry chain link's strict demand designs, it has stable and the long service life, these oil dope's exclusive formula, strengthened its lubricating ability and the high temperature oil film strength, and considered that with greases intermiscibility. It is used massively in the below proct instry chain link; Especially suits in the SMT backflow brazier and the wave ridge welds equipment's synthesis high temperature chain link's application. Textile instry stereotypia machine, stretching machine. The backflow brazier wave ridge welds the equipment dryer furnace and the oven power transmission sequence kiln stove's steady bearings roasting chain link building board proction line the wheel the dryer glass proction factory automobile roasts the paint line with Lian Youyao with bearing Hong Kaoji to roast the paint line chain link heat treatment proction line's bearing and the chain link lifelong initial assembly lubricating oil drinks the hoisting bucket proction line.
『伍』 請英文翻譯一下，（請勿機譯）謝謝
Introction
Is a fan of the original motives for the mechanical energy conversion of gas transportation, gas energy to the machinery, it is the metallurgical, petrochemical, energy and many other instries in the key power equipment, the event of a failure, may cause disruption of the entire proction process, or even lead to Casualties of serious incidents. However, e to its poor operating conditions more, plus the maintenance shutdown short time, but also involves the shaft, the shaft connection, support bearings, and other sports, friction or contact parts, prone to failure. So the fans on-line monitoring implementation of safe proction is of great significance.
Now commonly used by the PLC or the MCU to the fan as the core monitoring system, we can not show real-time operating system fan parameters of the condition changes can not take full advantage of previous data, and the whole monitoring system of monitoring and technical and data resources共享. In addition, operators of its technical requirements and higher.
Software is a data acquisition and process control of special software, it is one of the automatic control system monitoring software platform and development environment, using it can use a flexible configuration, rapid construction of instrial automation systems.
Mechanical design to the People's Republic of China Ministry of Instry in March 1998 "issued by the fan and vibration detection threshold" for the theoretical basis, with the present mature and widely used PC_Based Control Technology for technical support, development of a configuration based on the Gas fan vibration on-line monitoring system.
The system can achieve the following basic features:
1. Acquisition precise operation of the fan system vibration, speed, shaft displacement, and other working conditions parameters;
2. On the possible failure to predict with alarm the danger of tripping a signal to the automatic response.
Because of its use configuration software design, the relative previous monitoring system, it also has the following innovations:
1. Screen with human-computer interaction, real-time directly through the screen will fan functioning shown to rece the technical requirements of the operator;
2. Records data collection, storage and management to provide shared function, the researchers analyzed the test data with ease.
Keyword: Fan online monitoring PC configuration
『陸』 電氣方面的英語
變壓器
變壓器幾乎在所有的電子產品中都要用到，它原理簡單但根據不同的使用場合（不同的用途）變壓器的繞制工藝會有所不同的要求。變壓器的功能主要有：電壓變換；阻抗變換；隔離；穩壓（磁飽和變壓器）等，變壓器常用的鐵芯形狀一般有E型和C型鐵芯。
變壓器按用途可以分為：配電變壓器、電力變壓器、 全密封變壓器、組合式變壓器、乾式變壓器、 單相變壓器、電爐變壓器、整流變壓器、電抗器、抗用變壓器、防雷變壓器、箱式變壓器、箱式變電器。國內變壓器專業生產廠有浙江江山市雙鵬特種變壓器廠
變壓器的最基本型式，包括兩組繞有導線之線圈，並且彼此以電感方式稱合一起。當一交流電流(具有某一已知頻率)流於其中之一組線圈時，於另一組線圈中將感應出具有相同頻率之交流電壓，而感應的電壓大小取決於兩線圈耦合及磁交鏈之程度。
一般指連接交流電源的線圈稱之為「一次線圈」(Primary coil);而跨於此線圈的電壓稱之為「一次電壓.」。在二次線圈的感應電壓可能大於或小於一次電壓，是由一次線圈與二次線圈問的「匝數比」所決定的。因此，變壓器區分為升壓與降壓變壓器兩種。
轉爐
爐體可轉動，用於吹煉鋼或吹煉鋶的冶金爐。轉爐爐體用鋼板製成，呈圓筒形，內襯耐火材料，吹煉時靠化學反應熱加熱，不需外加熱源，是最重要的煉鋼設備，也可用於銅、鎳冶煉。轉爐按爐襯的耐火材料性質分為鹼性（用鎂砂或白雲石為內襯）和酸性（用硅質材料為內襯）轉爐；按氣體吹入爐內的部位分為底吹、頂吹和側吹轉爐；按吹煉採用的氣體，分為空氣轉爐和氧氣轉爐。轉爐煉鋼主要是以液態生鐵為原料的煉鋼方法。其主要特點是：靠轉爐內液態生鐵的物理熱和生鐵內各組分（如碳、錳、硅、磷等）與送入爐內的氧進行化學反應所產生的熱量，使金屬達到出鋼要求的成分和溫度。爐料主要為鐵水和造渣料（如石灰、石英、螢石等），為調整溫度，可加入廢鋼及少量的冷生鐵塊和礦石等。在轉爐煉鋼過程中，鐵水中的碳在高溫下和吹入的氧生成一氧化碳和少量二氧化碳的混合氣體，即轉爐煤氣。轉爐煤氣的發生量在一個冶煉過程中並不均衡，且成分也有變化，通常將轉爐多次冶煉過程回收的煤氣經降溫、除塵，輸入儲氣櫃，混勻後再輸送給用戶。
變極器，逆變器
逆變器（inverter）是把直流電能（電池、蓄電瓶）轉變成交流電（一般為220v50HZ正弦或方波）。應急電源，一般是把直流電瓶逆變成220v交流的。
通俗的講，逆變器是一種將直流電（DC）轉化為交流電（AC）的裝置。它由逆變橋、控制邏輯和濾波電路組成．
『柒』 求冶金建材設備英語詞彙!
你在網上先看看，查找一下！應該很多的，不過要先了解，小心上當受騙了！
『捌』 求助：英語翻譯
Qinhuang O-dimensional metal procts Co., Ltd. is China's domestic first-class, professional flange manufacturers, the company set casting, forging and machining together, proction and management of various materials and different specifications of the instrial and civil flanged plate.
The company occupies 38 acres, 2800 square meters factory, office building 1500 square meters. There are mainly semi-automatic cutting equipment, a variety of lathes, drill press, forging equipment, 70 pieces of Taiwan.Professional technicians, engineers, senior engineer and so on more than 40 people, according to the needs of customers to undertake metallurgy, chemical instry, machinery manufacturing and non-standard real work.All procts using advanced international standards, mainly in the Japanese standard, the United States standards, standards of the United States, Germany standards, standards for Africa, Australia and the standard Chinese standards.The company has strict quality management system in 1996, the first to invoke Japan's QC management system, combined with their own circumstances, the factory's strict scientific management.From the raw material into the plant to export finished procts, are each to ease the strict inspection by the professionals.Company management system in 2002 through the ISO9000 international quality management system certification, the company of my colleagues in 2004 by the Chinese General Administration of Quality Supervision as a "category management business" has become China's first export-free rate of 70% of the proction of flange Enterprises.The company's after-sales service system, operational staff have years of experience in international trade and professional standards excellent, very good to the completion of the general trade, processing, feed processing trade exports with a single, well in time To deal with the various customer feedback.At present, companies in Beijing, Shanghai, Dalian, Qing, Jinan and other offices to form a unified sales network, and continue to speed up the specialization and internationalization of pace for the development of enterprise groups have laid a solid foundation.Over the years, a company with excellent procts and services in the international market enjoyed a high reputation in Japan, the United States, Australia, Taiwan and other countries and regions to form a large distribution network around the world to establish friendly and stable Customer base.The company will always be "good quality, good faith compliance, customer satisfaction, and the pursuit of excellence" business philosophy, to make the world good friend, mutual benefit and work together for a better tomorrow!
『玖』 冶金機械學校的英文怎麼說
冶金機械學校的英文：
metallurgical machinery school
a. 冶金學的
- Metallography is the study of the microstructure of metals and alloys by means of the metallurgical microscope and the electron microscope.
金相學是用金相顯微鏡和電子顯微鏡對金屬和合金的顯微結構的研究。 - A material added in small amounts ring a chemical or metallurgical process to absorb impurities.
吸氣劑以少量加入化學或冶金過程中用來吸收雜質的物質 - They point out inadequacies in applying criteria developed from metallurgical practice to reinforced plastics
他們指出了把冶金工業採用的斷裂標准應用於增強塑料的不適合性。
n. 機器；機械；機械裝置；機關，機構
- The firm indented for new machinery.
這家公司用訂貨單訂購新機器。 - Much machinery has been bought.
已經購買了許多新裝置。 - consultative machinery at personal level
個人層面的咨詢架構；個人層面的咨詢制度
n. 學校，學院，學派，上學階段；上課時間；學校全體師生；群
v. 訓練；教育
- This is the argument of the school.
這就是流行學派的論據。 - the cock of the school
學生中的頭目；最橫行霸道的學生 - These are primary school pupils and those are secondary school students.
有小學生也有中學生。
『拾』 跪求一片關於冶金機械或機械設備介紹的英語論文，最好有漢語翻譯，沒有也可以哦
shi