注塑模具英文怎么说

① 塑料模具英文翻译

Pipi cattle through the wrist pad injection mold design, described the design of thermoplastic injection molding methods, the design objective is to use in meeting the conditions required to minimize the complexity of the mold, as well as system

Caused by this. Plastic injection mold used for molding thermoplastics, thermosetting plastics in recent years the application of molding parts are becoming increasingly widespread. Pipi cattle under the wrist pad plastic parts forming the structure and work

Art analysis, choice of material plastic parts, die structure design process. Mold design, mold manufacturing, mold materials, a reasonable processing technology and modern equipment such as molding molding quality plastic parts is an important condition for

One. Plastic parts of the wrist pad for Pipi cattle, requires a certain amount of toughness, anti-skid, wear-resistant properties.
This paper describes the design of the injection mold every aspect of the process, which focuses on the gating system design, molding parts, as well as the work of calculating the size of the mold manufacturing process. Gating system, including the mainstream Avenue,

Stream Road, gate and other points as well as the cold four parts. Molding parts including the cavity and core, are molar. Combined cavity, core processing to facilitate mold manufacturing, mold can rece manufacturing costs. Molding

Parts of work calculated using the average size of the calculation method, and the wall cavity and floor for strength checking to ensure that the safety performance and mold performance. In addition, most of the mold using a template

Market standard template, you can rece the die manufacturing cycles, lower manufacturing costs.
Throughout the design process, in addition to die design using the traditional method, but also skillfully use modern mold design and engineering software graphics software, such as Pro/E4.0, AutoCAD and so on, will not only allow the use of software-based

Convenience of intuitive, and can shorten the design cycle.
Key words: injection mold; Plastic molding process; molding parts manufacturing process

② 注塑成型工艺英文怎么说

经查，翻译如下

③ 注塑模的浇口有几种英文名称分别是

三通连接弯头Tee
junction
elbow
注塑模
Injection
Mould
液压元件Hydraulic
components
http://www.gkong.com/learn/learn_detail.asp?learn_id=581
模具设计Mould
design
工艺分析process
analysis
分型面Parting
Surface
浇注系统:
Gating
system(这里需要注意：浇注是pouring,但是浇注系统gating用的比较多）
注射机Injection
Molding
Machine
成型零部件
Molding
parts
侧浇口Side
Gate
直导柱straight
pillars
导向Guide
推杆puncher
液压侧抽芯Hydraulic
Side
Action
Abstract
This
paper
discussed
the
design
of
plastic
injection
mould
of
tee
junction
elbows,
and
the
process
analysis
of
the
parts'
structures.
The
author
determined
the
parting
surfaces
and
the
gating
system
etc,
choosed
the
injection
molding
machine,
calculated
the
sizes
of
the
molding
parts.
Side
gate
and
hydraulic
side
action
was
used,
straight
pillar
and
puncher
was
used
for
guiding
and
conveying
the
materials.
The
author
also
choosed
the
materials
of
the
mould.
The
structure
designed
in
such
way
can
ensure
the
reliable
running
of
the
mould.Finally,
the
author
checked
the
match
between
the
mould
structure
and
the
injection
molding
machine.
Keywords:
Tee
junction
elbow,Plastic
Injection
Mould,Hydraulic
components,Hydraulic
components

④ 塑料注塑产品用英语怎么说

塑料注塑产品_网络翻译
塑料注塑产品
[网络] Plastic Injection Molding; plastic injection;
[例句]我们专业设计生产塑料模具和各种版注塑产品。
We are professional designer and manufacturer of injection mold and all kinds of plastic procts.10 years making exprience.
进行更多权翻译

⑤ 注塑成型拉模英文怎么说

draft/pulling mark

⑥ 注塑模具中的几个专业名词的英文翻译是什么 双色模 靠破 模具后结构 试模 一射 二射 灌嘴 缩水 剥离 倒扣

双色模Double injection, 靠破shutoff surface, 试模trial shot, 灌嘴nozzle, 缩水sink mark,倒扣under cut, 开闭器parting line lock.

其他不专明白你的意属思。

⑦ 请问“注塑成型”和“模具”的英文是什么

注塑成型: injection molding
模具: mold

⑧ 塑胶模具的这几句英文怎么说

塑胶模具
[网络] plastic moulds; plastic molding; plastics mold; plastic mould;
[例句]所生产的塑胶模具，压铸模具及各种机械类夹具等产品，远销海外。
Our procts such as plastic molds, die-casting molds, and various mechanical clamps, are sold well overseas

⑨ 模具设计 注塑模具 翻译成英文

模具设计 mould design
注塑模具 injection mould