冶金设备英语
『壹』 冶金机械专业英语词汇
因为我不是冶金机械专业的，所以不是很清楚你需要的究竟是那些词汇，只是正好存有一部分有色金属以及机械方面的词汇表，所以就挑选了一些。（真不是故意弄这么多的，实在是不懂这些……抱歉啊~）如果需要更多的话，就补充问题吧~
钢铁的制造
Manufacturing of Steel
连续铸造法 Continuous casting process
电炉 Electric furnace
均热炉 Soaking pit
全静钢 Killed steel
半静钢 Semi-killed steel
沸腾钢(未净钢) Rimmed steel
钢铁生产流程 Steel Proction Flow Chart
钢材的熔铸、锻造、挤压及延轧
The Casting, Fogging, Extrusion, Rolling & Steel
熔铸 Casting
锻造 Fogging
挤压 Extrusion
延轧 Rolling
冲剪 Drawing & stamping
特殊钢 Special Steel
简介
General
特殊钢以原素分类
Classification of Special Steel according to Element
特殊钢以用途来分类
Classification of Special Steel according to End Usage
易车(快削)不锈钢
Free Cutting Stainless Steel
含铅易车钢
Leaded Free Cutting Steel
含硫易车钢
Sulphuric Free Cutting Steel
硬化性能
Hardenability
钢的脆性
Brittleness of Steel
低温脆性 Cold brittleness
回火脆性 Temper brittleness
日工标准下的特殊钢材
Specail Steel according to JIS Standard
铬钢 – 日工标准 JIS G4104
Chrome steel to JIS G4104
铬钼钢钢材 – 日工标准 G4105 62
Chrome Molybdenum steel to JIS G4105
镍铬 – 日工标准 G 63
Chrome Nickel steel to JIS G
镍铬钼钢 – 日工标准 G4103 64
Nickel, Chrome & Molybdenum Steel to JIS G4103
高锰钢铸 – 日工标准
High manganese steel to JIS standard
片及板材
Chapter Four-Strip, Steel & Plate
冷辘低碳钢片(双单光片)(日工标准 JIS G3141) 73 - 95
Cold Rolled (Low carbon) Steel Strip (to JIS G 3141)
简介
General
美材试标准的冷辘低碳钢片
Cold Rolled Steel Strip American Standard – American Society for testing and materials (ASTM)
日工标准JIS G3141冷辘低碳钢片(双单光片)的编号浅释
Decoding of cold rolled(Low carbon)steel strip JIS G3141
材料的加工性能 Drawing abillity
硬度 Hardness
表面处理 Surface finish
冷辘钢捆片及张片制作流程图表
Proction flow chart cold rolled steel coil sheet
冷辘钢捆片及张片的电镀和印刷方法
Cold rolled steel coil & sheet electro-plating & painting method
冷辘(低碳)钢片的分类用、途、工业标准、品质、加热状态及硬度表
End usages, instrial standard, quality, condition and hardness of cold rolled steel strip
硬度及拉力 Hardness & Tensile strength test
拉伸测试(顺纹测试)
Elongation test
杯突测试(厚度: 0.4公厘至1.6公厘，准确至0.1公厘 3个试片平均数)
Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm)
曲面(假曲率)
Camber
厚度及阔度公差 Tolerance on Thickness & Width
平坦度(阔度大于500公厘，标准回火)
Flatness (width>500mm, temper: standard)
弯度 Camber
冷辘钢片储存与处理提示
General advice on handling & storage of cold rolled steel coil & sheet
防止生锈
Rust Protection
生锈速度表
Speed of rusting
焊接 Welding
气焊 Gas Welding
埋弧焊 Submerged-arc Welding
电阻焊 Resistance Welding
冷辘钢片(拉力: 30-32公斤/平方米)在没有表面处理状态下的焊接状况
Spot welding conditions for bared (free from paint, oxides etc) Cold rolled mild steel sheets(T/S:30-32 Kgf/ μ m2)
时间效应(老化)及拉伸应变
Aging & Stretcher Strains
日工标准(JIS G3141)冷辘钢片化学成份
Chemical composition – cold rolled steel sheet to JIS G3141
冷辘钢片的"理论重量"计算方程式
Cold Rolled Steel Sheet – Theoretical mass
日工标准(JIS G3141)冷辘钢片重量列表
Mass of Cold-Rolled Steel Sheet to JIS G3141
冷辘钢片订货需知
Ordering of cold rolled steel strip/sheet
其它日工标准冷轧钢片(用途及编号)
JIS standard & application of other cold Rolled Special Steel
电镀锌钢片或电解钢片
Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet
简介
General
电解/电镀锌大大增强钢片的防锈能力
Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet
上漆能力 Paint Adhesion
电镀锌钢片的焊接
Welding of Electro-galvanized steel sheet
点焊
Spot welding
滚焊
Seam welding
电镀锌(电解)钢片
Electro-galvanized Steel Sheet
生产流程
Proction Flow Chart
常用的镀锌钢片(电解片)的基层金属、用途、日工标准、美材标准及一般厚度
Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet
锌镀层质量 Zinc Coating Mass
表面处理 Surface Treatment
冷轧钢片 Cold-Rolled Steel Sheet/Strip
热轧钢片 Hot-Rolled Sheet/Strip
电解冷轧钢片厚度公差
Thickness Tolerance of Electrolytic Cold-rolled sheet
热轧钢片厚度公差
Thickness Tolerance of Hot-rolled sheet
冷轧或热轧钢片阔度公差
Width Tolerance of Cold or Hot-rolled sheet
长度公差 Length Tolerance
理论质量 Theoretical Mass
锌镀层质量(两个相同锌镀层厚度)
Mass Calculation of coating (For equal coating)/MM
锌镀层质量(两个不同锌镀层厚度)
Mass Calculation of coating (For differential coating)/MM
镀锡薄铁片(白铁皮/马口铁) (日工标准 JIS G3303)
简介
General
镀锡薄铁片的构造
Construction of Electrolytic Tinplate
镀锡薄钢片(白铁皮/马日铁)制造过程
Proction Process of Electrolytic Tinplate
锡层质量
Mass of Tin Coating (JIS G3303-1987)
两面均等锡层
Both Side Equally Coated Mass
两面不均等锡层
Both Side Different Thickness Coated Mass
级别、电镀方法、镀层质量及常用称号
Grade, Plating type, Designation of Coating Mass & Common Coating Mass
镀层质量标记
Markings & Designations of Differential Coatings
硬度 Hardness
单相轧压镀锡薄铁片(白铁皮/马口铁)
Single-Reced Tinplate
双相辗压镀锡薄钢片(马口铁/白铁皮)
Dual-Rection Tinplate
钢的种类 Type of Steel
表面处理 Surface Finish
常用尺寸 Commonly Used Size
电器用硅 [硅] 钢片 Electrical Steel Sheet
简介 General
软磁材料 Soft Magnetic Material
滞后回线 Narrow Hystersis
矫顽磁力 Coercive Force
硬磁材料 Hard Magnetic Material
最大能量积 Maximum Energy Proct
硅含量对电器用的低碳钢片的最大好处
The Advantage of Using Silicon low Carbon Steel
晶粒取向(Grain-Oriented)及非晶粒取向(Non-Oriented)
Grain Oriented & Non-Oriented
电器用硅 [硅] 钢片的最终用途及规格
End Usage and Designations of Electrical Steel Strip
电器用的硅 [硅] 钢片之分类
Classification of Silicon Steel Sheet for Electrical Use
电器用钢片的绝缘涂层
Performance of Surface Insulation of Electrical Steel Sheets
晶粒取向电器用硅钢片主要工业标准
International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use
晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel
晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准)
Magnetic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard)
退火Annealing
电器用钢片用家需自行应力退火原因
Annealing of the Electrical Steel Sheet
退火时注意事项 Annealing Precautionary
碳污染 Prevent Carbon Contamination
热力应先从工件边缘透入
Heat from the Laminated Stacks Edges
提防过份氧化
No Excessive Oxidation
应力退火温度
Stress –relieving Annealing Temperature
晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets
晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(LS)定取向 钢片之磁力及电力性能
Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS
晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差
Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain
Oriented Electrical Steel Sheets
晶粒取向电器用硅(硅)钢片 – 高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之标准尺寸及包装
Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, & SI-ORIENT-CORE-HI-B-LS Grain-
Oriented Electrical Steel Sheets
绝缘表面 Surface Insulation
非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数
Lamination Factors of Electrical, Magnetic & Mechanical Non-Grain Oriented Electrical
电器及家电外壳用镀层冷辘 [低碳] 钢片
Coated (Low Carbon) Steel Sheets for Casing,Electricals & Home Appliances
镀铝硅钢片 Aluminized Silicon Alloy Steel Sheet
简介 General
镀铝硅合金钢片的特色
Feature of Aluminized Silicon Alloy Steel Sheet
用途
End Usages
抗化学品能力
Chemical Resistance
镀铝(硅)钢片 – 日工标准(JIS G3314)
Hot-aluminum-coated sheets and coils to JIS G 3314
镀铝(硅)钢片 – 美材试标准(ASTM A-463-77)35.7 JIS G3314镀热浸铝片的机械性能
Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils
公差 Size Tolerance
镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较
Comparsion of various resistance of aluminized steel & other kinds of steel
镀铝(硅)钢片生产流程
Aluminum Steel Sheet, Proction Flow Chart
焊接能力 Weldability
镀铝钢片的焊接状态(比较冷辘钢片)
Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip
钢板
Steel Plate
钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准
Type of steel Plate & Related JIS, ASTM and Other Major Instrial Standards
钢板生产流程
Proction Flow Chart
钢板订货需知
Ordering of Steel Plate
不锈钢
Stainless Steel
不锈钢的定义 Definition of Stainless Steel
不锈钢之分类，耐腐蚀性及耐热性
Classification, Corrosion Resistant & Heat Resistance of Stainless Steel
铁铬系不锈钢片
Chrome Stainless Steel
马氏体不锈钢
Martensite Stainless Steel
低碳马氏体不锈钢
Low Carbon Martensite Stainless Steel
含铁体不锈钢
Ferrite Stainless Steel
镍铬系不锈钢
Nickel Chrome Stainless Steel
释出硬化不锈钢
Precipitation Hardening Stainless Steel
铁锰铝不锈钢
Fe / Mn / Al / Stainless Steel
不锈钢的磁性
Magnetic Property & Stainless Steel
不锈钢箔、卷片、片及板之厚度分类
Classification of Foil, Strip, Sheet & Plate by Thickness
表面保护胶纸
Surface protection film
不锈钢片材常用代号
Designation of SUS Steel Special Use Stainless
表面处理 Surface finish
薄卷片及薄片(0.3至2.9mm厚之片)机械性能
Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet
不锈钢片机械性能(301, 304, 631, CSP)
Mechanical Properties of Spring use Stainless Steel
不锈钢 – 种类，工业标准，化学成份，特点及 主要用途
Stainless Steel – Type, Instrial Standard, Chemical Composition, Characteristic & end usage of the most commonly used Stainless Steel
不锈钢薄片用途例
End Usage of Thinner Gauge
不锈钢片、板用途例
Examples of End Usages of Strip, Sheet & Plate
不锈钢应力退火卷片常用规格名词图解
General Specification of Tension Annealed Stainless Steel Strips
耐热不锈钢
Heat-Resistance Stainless Steel
镍铬系耐热不锈钢特性、化学成份、及操作温度
Heat-Resistance Stainless Steel
铬系耐热钢
Chrome Heat Resistance Steel
镍铬耐热钢
Ni - Cr Heat Resistance Steel
超耐热钢
Special Heat Resistance Steel
抗热超级合金
Heat Resistance Super Alloy
耐热不锈钢比重表
Specific Gravity of Heat – resistance steel plates and sheets stainless steel
不锈钢材及耐热钢材标准对照表
Stainless and Heat-Resisting Steels
高碳钢片 High Carbon Steel Strip
分类
Classification
用组织结构分类
Classification According to Grain Structure
用含碳量分类 – 即低碳钢、中碳钢及高碳钢
Classification According to Carbon Contains
弹簧用碳钢片
CarbonSteel Strip For Spring Use
冷轧状态 Cold Rolled Strip
回火状态 Annealed Strip
淬火及回火状态
Hardened & Tempered Strip/ Precision – Quenched Steel Strip
贝氏体钢片 Bainite Steel Strip
弹簧用碳钢片材之边缘处理 Edge Finished
淬火剂
Quenching Media
碳钢回火 Tempering
回火有低温回火及高温回火
Low & High Temperature Tempering
高温回火
High Temperature Tempering
退火 Annealing
完全退火 Full Annealing
扩散退火 Diffusion Annealing
低温退火 Low Temperature Annealing
中途退火 Process Annealing
球化退火 Spheroidizing Annealing
光辉退火 Bright Annealing
淬火 Quenching
时间淬火 Time Quenching
奥氏铁孻回火 Austempering
马氏铁体淬火 Marquenching
高碳钢片用途 End Usage of High Carbon Steel Strip
冷轧高碳钢 – 日本工业标准
Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311
电镀金属钢片 Plate Metal Strip
简介 General
电镀金属捆片的优点
Advantage of Using Plate Metal Strip
金属捆片电镀层
Plated Layer of Plated Metal Strip
镀镍 Nickel Plated
镀铬 Chrome Plated
镀黄铜 Brass Plated
基层金属 Base Metal of Plated Metal Strip
低碳钢或铁基层金属
Iron & Low Carbon as Base Metal
不锈钢基层金属 Stainless Steel as Base Metal
铜基层金属
Copper as Base Metal
黄铜基层金属
Brass as Base Metal
轴承合金 Bearing Alloy
『贰』 “矿山、冶金机械成套设备备件的生产和服务”翻译成英语
proction and service of the spare parts for the compelete equipment of mining and metallurgical machinery
『叁』 急求关于冶金行业钢铁厂一些设备的英文翻译:
烧结机头,sintering machine head
烧结机尾,sintering machine end
烧结槽上槽下,upper and lower cintering tank
干燥,drying
整粒系统,
槽前回筛,before-tank screen
高炉出铁场,blast furnace casting
配料,ingredients
竖窑烧结,shaft kiln sintering
回转窑,rotary kiln
带冷机,belt cooling machine
铜冶答炼制酸, acid making by copper smelting
高温锌焙烧.high-temperature zinc roasting
个别拿不准，你再找找！
『肆』 产品介绍的英语
The CPI synthesis chain link oil is one kind of specially made PAO synthesis segregation of hydrocarbons gas lubricating oil, it has the outstanding lubricating ability, the low volatility in the high low temperature situation, may have the good compatibility in the use mineral oil's situation with the mineral oil. This proct is one kind of long life lubricating oil, its anti-wearability and the ep characteristic cause it to apply in the actual load bearing capacity scope are widespread. It is recommended uses in the gear and the bearing. And also has the very broad application in the powder metallurgy aspect.
The CPI high temperature chain link oil is specially the spinning and weaving, the baking varnish and each instry chain link's strict demand designs, it has stable and the long service life, these oil dope's exclusive formula, strengthened its lubricating ability and the high temperature oil film strength, and considered that with greases intermiscibility. It is used massively in the below proct instry chain link; Especially suits in the SMT backflow brazier and the wave ridge welds equipment's synthesis high temperature chain link's application. Textile instry stereotypia machine, stretching machine. The backflow brazier wave ridge welds the equipment dryer furnace and the oven power transmission sequence kiln stove's steady bearings roasting chain link building board proction line the wheel the dryer glass proction factory automobile roasts the paint line with Lian Youyao with bearing Hong Kaoji to roast the paint line chain link heat treatment proction line's bearing and the chain link lifelong initial assembly lubricating oil drinks the hoisting bucket proction line.
『伍』 请英文翻译一下，（请勿机译）谢谢
Introction
Is a fan of the original motives for the mechanical energy conversion of gas transportation, gas energy to the machinery, it is the metallurgical, petrochemical, energy and many other instries in the key power equipment, the event of a failure, may cause disruption of the entire proction process, or even lead to Casualties of serious incidents. However, e to its poor operating conditions more, plus the maintenance shutdown short time, but also involves the shaft, the shaft connection, support bearings, and other sports, friction or contact parts, prone to failure. So the fans on-line monitoring implementation of safe proction is of great significance.
Now commonly used by the PLC or the MCU to the fan as the core monitoring system, we can not show real-time operating system fan parameters of the condition changes can not take full advantage of previous data, and the whole monitoring system of monitoring and technical and data resources共享. In addition, operators of its technical requirements and higher.
Software is a data acquisition and process control of special software, it is one of the automatic control system monitoring software platform and development environment, using it can use a flexible configuration, rapid construction of instrial automation systems.
Mechanical design to the People's Republic of China Ministry of Instry in March 1998 "issued by the fan and vibration detection threshold" for the theoretical basis, with the present mature and widely used PC_Based Control Technology for technical support, development of a configuration based on the Gas fan vibration on-line monitoring system.
The system can achieve the following basic features:
1. Acquisition precise operation of the fan system vibration, speed, shaft displacement, and other working conditions parameters;
2. On the possible failure to predict with alarm the danger of tripping a signal to the automatic response.
Because of its use configuration software design, the relative previous monitoring system, it also has the following innovations:
1. Screen with human-computer interaction, real-time directly through the screen will fan functioning shown to rece the technical requirements of the operator;
2. Records data collection, storage and management to provide shared function, the researchers analyzed the test data with ease.
Keyword: Fan online monitoring PC configuration
『陆』 电气方面的英语
变压器
变压器几乎在所有的电子产品中都要用到，它原理简单但根据不同的使用场合（不同的用途）变压器的绕制工艺会有所不同的要求。变压器的功能主要有：电压变换；阻抗变换；隔离；稳压（磁饱和变压器）等，变压器常用的铁芯形状一般有E型和C型铁芯。
变压器按用途可以分为：配电变压器、电力变压器、 全密封变压器、组合式变压器、干式变压器、 单相变压器、电炉变压器、整流变压器、电抗器、抗用变压器、防雷变压器、箱式变压器、箱式变电器。国内变压器专业生产厂有浙江江山市双鹏特种变压器厂
变压器的最基本型式，包括两组绕有导线之线圈，并且彼此以电感方式称合一起。当一交流电流(具有某一已知频率)流于其中之一组线圈时，于另一组线圈中将感应出具有相同频率之交流电压，而感应的电压大小取决于两线圈耦合及磁交链之程度。
一般指连接交流电源的线圈称之为「一次线圈」(Primary coil);而跨于此线圈的电压称之为「一次电压.」。在二次线圈的感应电压可能大于或小于一次电压，是由一次线圈与二次线圈问的「匝数比」所决定的。因此，变压器区分为升压与降压变压器两种。
转炉
炉体可转动，用于吹炼钢或吹炼锍的冶金炉。转炉炉体用钢板制成，呈圆筒形，内衬耐火材料，吹炼时靠化学反应热加热，不需外加热源，是最重要的炼钢设备，也可用于铜、镍冶炼。转炉按炉衬的耐火材料性质分为碱性（用镁砂或白云石为内衬）和酸性（用硅质材料为内衬）转炉；按气体吹入炉内的部位分为底吹、顶吹和侧吹转炉；按吹炼采用的气体，分为空气转炉和氧气转炉。转炉炼钢主要是以液态生铁为原料的炼钢方法。其主要特点是：靠转炉内液态生铁的物理热和生铁内各组分（如碳、锰、硅、磷等）与送入炉内的氧进行化学反应所产生的热量，使金属达到出钢要求的成分和温度。炉料主要为铁水和造渣料（如石灰、石英、萤石等），为调整温度，可加入废钢及少量的冷生铁块和矿石等。在转炉炼钢过程中，铁水中的碳在高温下和吹入的氧生成一氧化碳和少量二氧化碳的混合气体，即转炉煤气。转炉煤气的发生量在一个冶炼过程中并不均衡，且成分也有变化，通常将转炉多次冶炼过程回收的煤气经降温、除尘，输入储气柜，混匀后再输送给用户。
变极器，逆变器
逆变器（inverter）是把直流电能（电池、蓄电瓶）转变成交流电（一般为220v50HZ正弦或方波）。应急电源，一般是把直流电瓶逆变成220v交流的。
通俗的讲，逆变器是一种将直流电（DC）转化为交流电（AC）的装置。它由逆变桥、控制逻辑和滤波电路组成．
『柒』 求冶金建材设备英语词汇!
你在网上先看看，查找一下！应该很多的，不过要先了解，小心上当受骗了！
『捌』 求助：英语翻译
Qinhuang O-dimensional metal procts Co., Ltd. is China's domestic first-class, professional flange manufacturers, the company set casting, forging and machining together, proction and management of various materials and different specifications of the instrial and civil flanged plate.
The company occupies 38 acres, 2800 square meters factory, office building 1500 square meters. There are mainly semi-automatic cutting equipment, a variety of lathes, drill press, forging equipment, 70 pieces of Taiwan.Professional technicians, engineers, senior engineer and so on more than 40 people, according to the needs of customers to undertake metallurgy, chemical instry, machinery manufacturing and non-standard real work.All procts using advanced international standards, mainly in the Japanese standard, the United States standards, standards of the United States, Germany standards, standards for Africa, Australia and the standard Chinese standards.The company has strict quality management system in 1996, the first to invoke Japan's QC management system, combined with their own circumstances, the factory's strict scientific management.From the raw material into the plant to export finished procts, are each to ease the strict inspection by the professionals.Company management system in 2002 through the ISO9000 international quality management system certification, the company of my colleagues in 2004 by the Chinese General Administration of Quality Supervision as a "category management business" has become China's first export-free rate of 70% of the proction of flange Enterprises.The company's after-sales service system, operational staff have years of experience in international trade and professional standards excellent, very good to the completion of the general trade, processing, feed processing trade exports with a single, well in time To deal with the various customer feedback.At present, companies in Beijing, Shanghai, Dalian, Qing, Jinan and other offices to form a unified sales network, and continue to speed up the specialization and internationalization of pace for the development of enterprise groups have laid a solid foundation.Over the years, a company with excellent procts and services in the international market enjoyed a high reputation in Japan, the United States, Australia, Taiwan and other countries and regions to form a large distribution network around the world to establish friendly and stable Customer base.The company will always be "good quality, good faith compliance, customer satisfaction, and the pursuit of excellence" business philosophy, to make the world good friend, mutual benefit and work together for a better tomorrow!
『玖』 冶金机械学校的英文怎么说
冶金机械学校的英文：
metallurgical machinery school
a. 冶金学的
- Metallography is the study of the microstructure of metals and alloys by means of the metallurgical microscope and the electron microscope.
金相学是用金相显微镜和电子显微镜对金属和合金的显微结构的研究。 - A material added in small amounts ring a chemical or metallurgical process to absorb impurities.
吸气剂以少量加入化学或冶金过程中用来吸收杂质的物质 - They point out inadequacies in applying criteria developed from metallurgical practice to reinforced plastics
他们指出了把冶金工业采用的断裂标准应用于增强塑料的不适合性。
n. 机器；机械；机械装置；机关，机构
- The firm indented for new machinery.
这家公司用订货单订购新机器。 - Much machinery has been bought.
已经购买了许多新装置。 - consultative machinery at personal level
个人层面的咨询架构；个人层面的咨询制度
n. 学校，学院，学派，上学阶段；上课时间；学校全体师生；群
v. 训练；教育
- This is the argument of the school.
这就是流行学派的论据。 - the cock of the school
学生中的头目；最横行霸道的学生 - These are primary school pupils and those are secondary school students.
有小学生也有中学生。
『拾』 跪求一片关于冶金机械或机械设备介绍的英语论文，最好有汉语翻译，没有也可以哦
shi